Helper

Ancient Setup & Troubleshooting Guide Overlay Setup & Compatibility Guide SteelSeries / NVIDIA / AMD Configuration This guide explains how to configure supported overlay software across NVIDIA and AMD systems. 🖥️ GPU Compatibility NVIDIA GPUs Supports NVIDIA App Overlay Supports SteelSeries GG AMD GPUs Supports SteelSeries GG only 🔧 SteelSeries GG Setup (Fullscreen Supported) Download: https://steelseries.com/gg/download/ Steps: Open SteelSeries GG Go to Settings → General → General Enable Sonar Go to Sonar → Shortcuts Bind F7 to Master Volume Up Use shortcut before launching the game 🎮 NVIDIA App Overlay Setup Download: https://www.nvidia.com/en-eu/software/nvidia-app/ Steps: Open NVIDIA App Go to Settings → General Enable In-Game Overlay Ensure overlay is enabled before launching games 🎥 Medal Overlay Download: https://medal.tv/download Notes: Requires account registration Some regions may require VPN Fullscreen support may vary by game 💬 Discord Overlay Setup Discord: https://discord.com/ Steps: Open Discord Go to User Settings → Game Overlay Enable In-Game Overlay Advanced Settings: Disable Legacy Overlay Disable Hardware Acceleration (Settings → Appearance → Advanced) Fix: If overlay is not detected, toggle it OFF → ON Click ME for loader 1. To launch our product, you will need: Disable the antivirus 2. Launch the loader 3. Insert the key 4. Press the inject ⚙️ System Requirements CPU with AES support BIOS: VT-X / SVM enabled 16GB RAM minimum Windows 10–11 (1809–24H2) Intel or AMD CPU supported 🛠️ Common Issues Overlay not working Restart overlay application Ensure overlay is enabled before launching game Fullscreen issues Some overlays do not support exclusive fullscreen Switch to Borderless Windowed mode Performance issues Update GPU drivers Restart system after changes System & Driver Errors Error: Please disable Intel Rapid Storage Technology Fix: Microsoft Guide Error: Bind button does not work Reinject Ancient Run Ancient as Administrator Error: No menu / loader closes immediately Fix: Install Microsoft Visual C++ x64 CPU & Virtualization Errors Error: AES instruction set not supported Fix: Cannot be fixed (hardware limitation) Error: Enable VT-X / AMD-V Fix: Enable virtualization in BIOS Error: VMX / SVM not supported Fix: Disable Hyper-V and Virtual Machine Platform, then run: bcdedit /set hypervisorlaunchtype off Restart your PC. Hardware ID Error Error: Incorrect HWID Fix: Run Command Prompt as Administrator: wmic diskdrive get Caption, SerialNumber wmic baseboard get SerialNumber If commands fail, reinstall Windows.

Download Loader Here! Errors: Loader close with no error: - Install this: *link* you can see menu in the game, but you cannot interact with it - Run the overlay as administrator according to the instructions above. Windows 10 "Make sure all antiviruses are disabled" error: - Uninstall all third-party antiviruses - Disable real-time protection - Disable SmartScreen Windows 11 "Make sure all antiviruses are disabled" error: - Download both files: *link* - Run Turn_ON, agree to the changes in the registry, restart the PC. - Then run Turn_OFF, agree to the changes in the registry, restart your computer. - If this doesn't help, check that you have removed antivirus and disabled real-time protection. Other errors caused by loader: - Send a screenshot of the error to support on the website (bottom right corner), download Anydesk and also send it to support chat. You can see the menu, but it is not clickable: - Run Steam NOT as administrator - Disable all third party overlays (leave only Nvidia or AMD depending on your video card) Menus disappear in game or there are menus but visual functions don't work: - If there was a patch in the game, wait for a product update - Check the integrity of the game files, but a full reinstall is best - If none of the solutions worked for you, contact the support chat room The menu in the game is not clickable / does not open the first time: - Start Steam WITHOUT admin rights (in case you play via Steam). - Disable EA App overlay in the application settings (in case you play via EA App). AES instruction set is not supported: - This error means the processor does not support the AES instruction set, so it cannot be fixed. Contact for refund. Please enable Intel VT-X in the BIOS: - To fix this error, enter the BIOS and search for a feature named either "Intel virtualization technology" or "Intel VT-X" and enable it. Please enable AMD-V in BIOS: - To fix this error, enter the BIOS and search for a feature named either "AMD-V" or "SVM mode" and enable it. Please disable secure boot in the BIOS: - To fix this error, enter the BIOS and disable the secure boot feature. Unsupported firmware: To fix this error, convert the disk containing the operating system to GPT format using the built-in Windows tool mbr2gpt or any disk management utility of choice. Secure boot keys are incorrect and need to be enrolled: To fix this error, enter BIOS and enable Secure Boot, save the settings, make sure you have enabled it correctly by opening PowerShell and typing "Confirm-SecureBootUEFI", if the output is "True", you can reboot the computer, then enter BIOS and disable Secure Boot. VMX/SVM is not supported: To fix this error, browse to "Control panel" -> "Programs and Features" -> "Turn Windows features on or off", and make sure that "Virtual machine platform" and "Hyper-V" are disabled. If the error still persists, open cmd as administrator and enter the following command without quotes "bcdedit /set hypervisorlaunchtype off" then press Enter and reboot the pc. Incorrect hwid - Open cmd as administrator, enter these commands one by one wmic diskdrive get Caption, SerialNumber wmic baseboard get SerialNumber if any of those commands failed with an error then something is wrong with your pc, try to reinstall Windows and check if the problem is gone. If you encounter any other problems, contact support on the website. Secure boot fixes: https://docs.google.com/document/d/1JAVXQriz7Vid-H5r9UXERui7Q7UDoptn8b6i9-_vg90/edit?usp=sharing

Go to https://predator.systems/panel/subscriptions and create an account. Once registered, you can download the loader and follow the instructions provided on the site. FAQ: Here Before Loading: Disable all Antivirus software and Windows Defender. You can easily disable Windows Defender using dControl. Download it and run the application to turn off Windows Defender. Instructions: Download the loader from the link provided above. Open it as administrator, Sign up or log in to your account and enter your license key. Choose your cheat and spoofer options in the loader. Launch the game and make sure it is set to borderless window mode. Enjoy the game with the cheat enabled!

Download Loader Here! Password is "riven" Errors: Loader close with no error: - Install this: *link* you can see menu in the game, but you cannot interact with it - Run the overlay as administrator according to the instructions above. Windows 10 "Make sure all antiviruses are disabled" error: - Uninstall all third-party antiviruses - Disable real-time protection - Disable SmartScreen Windows 11 "Make sure all antiviruses are disabled" error: - Download both files: *link* - Run Turn_ON, agree to the changes in the registry, restart the PC. - Then run Turn_OFF, agree to the changes in the registry, restart your computer. - If this doesn't help, check that you have removed antivirus and disabled real-time protection. Other errors caused by loader: - Send a screenshot of the error to support on the website (bottom right corner), download Anydesk and also send it to support chat. You can see the menu, but it is not clickable: - Run Steam NOT as administrator - Disable all third party overlays (leave only Nvidia or AMD depending on your video card) Menus disappear in game or there are menus but visual functions don't work: - If there was a patch in the game, wait for a product update - Check the integrity of the game files, but a full reinstall is best - If none of the solutions worked for you, contact the support chat room The menu in the game is not clickable / does not open the first time: - Start Steam WITHOUT admin rights (in case you play via Steam). - Disable EA App overlay in the application settings (in case you play via EA App). AES instruction set is not supported: - This error means the processor does not support the AES instruction set, so it cannot be fixed. Contact for refund. Please enable Intel VT-X in the BIOS: - To fix this error, enter the BIOS and search for a feature named either "Intel virtualization technology" or "Intel VT-X" and enable it. Please enable AMD-V in BIOS: - To fix this error, enter the BIOS and search for a feature named either "AMD-V" or "SVM mode" and enable it. Please disable secure boot in the BIOS: - To fix this error, enter the BIOS and disable the secure boot feature. Unsupported firmware: To fix this error, convert the disk containing the operating system to GPT format using the built-in Windows tool mbr2gpt or any disk management utility of choice. Secure boot keys are incorrect and need to be enrolled: To fix this error, enter BIOS and enable Secure Boot, save the settings, make sure you have enabled it correctly by opening PowerShell and typing "Confirm-SecureBootUEFI", if the output is "True", you can reboot the computer, then enter BIOS and disable Secure Boot. VMX/SVM is not supported: To fix this error, browse to "Control panel" -> "Programs and Features" -> "Turn Windows features on or off", and make sure that "Virtual machine platform" and "Hyper-V" are disabled. If the error still persists, open cmd as administrator and enter the following command without quotes "bcdedit /set hypervisorlaunchtype off" then press Enter and reboot the pc. Incorrect hwid - Open cmd as administrator, enter these commands one by one wmic diskdrive get Caption, SerialNumber wmic baseboard get SerialNumber if any of those commands failed with an error then something is wrong with your pc, try to reinstall Windows and check if the problem is gone. If you encounter any other problems, contact support on the website. Secure boot fixes: https://docs.google.com/document/d/1JAVXQriz7Vid-H5r9UXERui7Q7UDoptn8b6i9-_vg90/edit?usp=sharing

Temp Accounts Guide This applies to the following accounts: ARC Raiders: Temp Account Battlefield 6: Temp Account CS2 Prime: Temp Account DayZ: Temp Account EFT: Temp Account Rust: Temp Account Download and Login Before using loader, disable the automatic steam sign in option See image Here Download the account login loader: NFA Loader Latest Run the loader as Administrator Enter your key and log in to the account That’s it! You are ready to use the account. Common Fixes Loader Crashes on Startup Download and install Microsoft Edge, as the loader depends on it. If the issue persists, install Evergreen Standalone Installer x64: Microsoft WebView2 Installer Error: Failed to remove LocalAppData Steam directory: Access is denied (OS Error 5) Fix: Run the loader as Administrator Error: Failed to get the Steam path: The system cannot find the file specified (OS Error 2) Fix: Delete and reinstall Steam Error: Failed to create 0x100 file: Local error 0x998 Fix: Connect to a VPN If it still fails, try a different VPN until it works Error: Failed to fetch Fix: You have been rate limited Do not spam sign-in attempts Wait a few minutes and try again using a VPN Download the account login loader: NFA Loader Latest Run the loader as Administrator Enter your key and log in to the account That’s it! You are ready to use the account. Common Fixes Loader Crashes on Startup Download and install Microsoft Edge, as the loader depends on it. If the issue persists, install Evergreen Standalone Installer x64: Microsoft WebView2 Installer Error: Failed to remove LocalAppData Steam directory: Access is denied (OS Error 5) Fix: Run the loader as Administrator Error: Failed to get the Steam path: The system cannot find the file specified (OS Error 2) Fix: Delete and reinstall Steam Error: Failed to create 0x100 file: Local error 0x998 Fix: Connect to a VPN If it still fails, try a different VPN until it works Error: Failed to fetch Fix: You have been rate limited Do not spam sign-in attempts Wait a few minutes and try again using a VPN

Cashapp, Paypal, Crypto, Venmo, and many other payment methods can be taken by clicking here

All Product help can be found here

EXODUS SOFTWARE SETUP GUIDE System Requirements Compatibility Processor: AMD or Intel CPU Windows 10: Version 1903 or later (Insider builds not supported) Windows 11: Supported up to 25H2 (Insider or custom builds not supported) BIOS Configuration Virtualization: VT-x (Intel) / AMD-V or SVM (AMD) enabled Not required when using HWID Virtualizer Secure Boot: Disabled (Intel CPUs only) TPM: Disable if using the spoofer Storage Mode: AHCI enabled (disable RAID / Intel Rapid Storage) UEFI Mode: Required for Intel CPUs Minimum Specifications 16 GB RAM or more NVIDIA or AMD GPU Supported launchers: Steam, Epic Games, Ubisoft Connect Important Notices Newer Windows 11 versions have increased security and may cause initial compatibility issues First-time loader use may trigger multiple system reboots Always run the loader and related software as Administrator All security software must be disabled before installation Installation and Launch Guide Step 1: Pre-Installation Preparation Disable Security Features Windows Defender / Antivirus Windows PIN or Password (required when using spoofer) Any third-party security software Medal Setup (External Software Only) Download and install Medal Clipping app Run Medal as Administrator, no need to do anything further with the app. Just run it. Step 2: Software Launch Process Initial Loader Launch First launch may cause system reboots If reboot occurs, reopen the loader after restart License Activation Download the loader: https://undetect.net/loader_exodus Run the loader as Administrator Right-click inside the loader window Paste your license key and press Enter Cleaner / Spoofer Selection Choose based on your needs: Cleaner: Recommended for first-time users Spoofer: Use for HWID protection Game Launch Launch the game after the CMD window closes Wait up to 3 minutes for the in-game menu to appear Menu toggle key: Insert Troubleshooting Common Errors Virtualization Errors Intel VT-x / AMD-V not supported: Enable virtualization in BIOS Unload third-party hypervisor: Remove virtualization software PowerShell-based fixes may be required in rare cases Overlay Error Ensure Medal is running as Administrator Medal overlay must be active Storage / Disk Errors Enable AHCI disk mode: Switch from RAID/IDE to AHCI in BIOS Intel Rapid Storage detected: Disable IRST and related services Virtual or RAID disk detected: Disable storage virtualization Hardware Compatibility Errors AES instruction set not supported: Enable AES in BIOS Unsupported NVIDIA driver: Update via GeForce Experience Failed to initialize renderer: Disable integrated graphics in BIOS Memory and Allocation Errors Failed to allocate memory: Ensure at least 16 GB RAM is available Disable unnecessary startup applications Move loader from cloud storage to a local drive HWID and Security Errors Incompatible HWID: Request HWID reset through support Failed to spoof hardware: Check for conflicting software Incorrect HWID: Verify system identifiers using CMD tools Network and Download Errors No available servers: Check server status or try a VPN Failed to download files: Update Windows and retry Failed to download font: Install required font manually Windows-Specific Fixes Error 0x302 Restart your system Launch the loader again Check for Windows updates Mapper Errors Upgrade or downgrade Windows version Use an original Windows installation (no custom builds) Black Screen Issues Update Windows to the latest version Verify GPU driver compatibility Unsupported Firmware Convert system disk to GPT using mbr2gpt Use Windows Disk Management if needed Support Reminders Use Discord or Telegram for HWID resets and server status Read error messages carefully before contacting support Back up important data before making system changes Check regularly for software updates Quick Checklist Before Launch Security software disabled BIOS configured correctly SteelSeries overlay configured (if required) License key copied Game fully closed during injection Loader run as Administrator Disclaimer: This software is provided for educational purposes only. Use at your own risk and in compliance with all applicable laws, terms of service, and platform rules.

All info can be found HERE

Instruction Arcane IMPORTANT TO READ! Before activating the key: Install this: *link* Read the instructions carefully Restart your computer before launching the software (mandatory) DISABLE WINDOWS PIN, IT TELLS YOU THIS FOR A REASON! We remind you that using software is always a risk! You purchase the software at your own risk. Undetected status does not guarantee 100% protection against blocking (with any software, a ban is possible in any game). If the update is in the game, wait for the software update. NOT use on the main account. Use based on your own risk. DISABLE or DELETE MANDATORY Remove antivirus Disable SmartScreen Disable Windows defender Delete FaceIt and Vanguard FaceIt is a standalone anti-cheat for CS: GO games Vanguard is an anti-cheat for Valorant Starting instructions: Click me to download the loader and place it anywhere (it is desirable to create a separate folder for it) Run the software file as administrator. After the loader update, run the new file again. Enter your key and press "Enter" (To insert key use right mouse button (RMB) in CMD loader ) Loader will ask you to restart your PC. After rebooting, reopen the loader and wait for it to finish loading. (The loader may ask you to restart your PC up to three times in a row — this is normal and only required during the initial product setup on your PC) Loader will automatically close after successful loading Launch the game. The menu will appear automatically. You can open / close the menu by pressing the "Home or Insert" key. Errors: Loader close with no error: - Install this: *link* you can see menu in the game, but you cannot interact with it - Run the overlay as administrator according to the instructions above. Windows 10 "Make sure all antiviruses are disabled" error: - Uninstall all third-party antiviruses - Disable real-time protection - Disable SmartScreen Windows 11 "Make sure all antiviruses are disabled" error: - Download both files: *link* - Run Turn_ON, agree to the changes in the registry, restart the PC. - Then run Turn_OFF, agree to the changes in the registry, restart your computer. - If this doesn't help, check that you have removed antivirus and disabled real-time protection. Other errors caused by loader: - Send a screenshot of the error to support on the website (bottom right corner), download Anydesk and also send it to support chat. You can see the menu, but it is not clickable: - Run Steam NOT as administrator - Disable all third party overlays (leave only Nvidia or AMD depending on your video card) Menus disappear in game or there are menus but visual functions don't work: - If there was a patch in the game, wait for a product update - Check the integrity of the game files, but a full reinstall is best - If none of the solutions worked for you, contact the support chat room The menu in the game is not clickable / does not open the first time: - Start Steam WITHOUT admin rights (in case you play via Steam). - Disable EA App overlay in the application settings (in case you play via EA App). AES instruction set is not supported: - This error means the processor does not support the AES instruction set, so it cannot be fixed. Contact for refund. Please enable Intel VT-X in the BIOS: - To fix this error, enter the BIOS and search for a feature named either "Intel virtualization technology" or "Intel VT-X" and enable it. Please enable AMD-V in BIOS: - To fix this error, enter the BIOS and search for a feature named either "AMD-V" or "SVM mode" and enable it. Please disable secure boot in the BIOS: - To fix this error, enter the BIOS and disable the secure boot feature. Unsupported firmware: To fix this error, convert the disk containing the operating system to GPT format using the built-in Windows tool mbr2gpt or any disk management utility of choice. Secure boot keys are incorrect and need to be enrolled: To fix this error, enter BIOS and enable Secure Boot, save the settings, make sure you have enabled it correctly by opening PowerShell and typing "Confirm-SecureBootUEFI", if the output is "True", you can reboot the computer, then enter BIOS and disable Secure Boot. VMX/SVM is not supported: To fix this error, browse to "Control panel" -> "Programs and Features" -> "Turn Windows features on or off", and make sure that "Virtual machine platform" and "Hyper-V" are disabled. If the error still persists, open cmd as administrator and enter the following command without quotes "bcdedit /set hypervisorlaunchtype off" then press Enter and reboot the pc. Incorrect hwid - Open cmd as administrator, enter these commands one by one wmic diskdrive get Caption, SerialNumber wmic baseboard get SerialNumber if any of those commands failed with an error then something is wrong with your pc, try to reinstall Windows and check if the problem is gone. If you encounter any other problems, contact support on the website. Secure boot fixes: https://docs.google.com/document/d/1JAVXQriz7Vid-H5r9UXERui7Q7UDoptn8b6i9-_vg90/edit?usp=sharing

Ancient Setup & Troubleshooting Guide Overlay Setup & Compatibility Guide SteelSeries / NVIDIA / AMD Configuration This guide explains how to configure supported overlay software across NVIDIA and AMD systems. 🖥️ GPU Compatibility NVIDIA GPUs Supports NVIDIA App Overlay Supports SteelSeries GG AMD GPUs Supports SteelSeries GG only 🔧 SteelSeries GG Setup (Fullscreen Supported) Download: https://steelseries.com/gg/download/ Steps: Open SteelSeries GG Go to Settings → General → General Enable Sonar Go to Sonar → Shortcuts Bind F7 to Master Volume Up Use shortcut before launching the game 🎮 NVIDIA App Overlay Setup Download: https://www.nvidia.com/en-eu/software/nvidia-app/ Steps: Open NVIDIA App Go to Settings → General Enable In-Game Overlay Ensure overlay is enabled before launching games 🎥 Medal Overlay Download: https://medal.tv/download Notes: Requires account registration Some regions may require VPN Fullscreen support may vary by game 💬 Discord Overlay Setup Discord: https://discord.com/ Steps: Open Discord Go to User Settings → Game Overlay Enable In-Game Overlay Advanced Settings: Disable Legacy Overlay Disable Hardware Acceleration (Settings → Appearance → Advanced) Fix: If overlay is not detected, toggle it OFF → ON Click ME for loader 1. To launch our product, you will need: Disable the antivirus 2. Launch the loader 3. Insert the key 4. Press the inject ⚙️ System Requirements CPU with AES support BIOS: VT-X / SVM enabled 16GB RAM minimum Windows 10–11 (1809–24H2) Intel or AMD CPU supported 🛠️ Common Issues Overlay not working Restart overlay application Ensure overlay is enabled before launching game Fullscreen issues Some overlays do not support exclusive fullscreen Switch to Borderless Windowed mode Performance issues Update GPU drivers Restart system after changes System & Driver Errors Error: Please disable Intel Rapid Storage Technology Fix: Microsoft Guide Error: Bind button does not work Reinject Ancient Run Ancient as Administrator Error: No menu / loader closes immediately Fix: Install Microsoft Visual C++ x64 CPU & Virtualization Errors Error: AES instruction set not supported Fix: Cannot be fixed (hardware limitation) Error: Enable VT-X / AMD-V Fix: Enable virtualization in BIOS Error: VMX / SVM not supported Fix: Disable Hyper-V and Virtual Machine Platform, then run: bcdedit /set hypervisorlaunchtype off Restart your PC. Hardware ID Error Error: Incorrect HWID Fix: Run Command Prompt as Administrator: wmic diskdrive get Caption, SerialNumber wmic baseboard get SerialNumber If commands fail, reinstall Windows.