Arena Breakout Infinite Latest Topicshttps://wackeycheats.com/forums/forum/38-arena-breakout-infinite/Arena Breakout Infinite Latest TopicsenABI: Radarhttps://wackeycheats.com/forums/topic/84-abi-radar/  Radar Setup & Troubleshooting Guide

Overlay Setup & Compatibility Guide

SteelSeries / NVIDIA / AMD Configuration

This guide explains how to configure supported overlay software across NVIDIA and AMD systems.

🖥️ GPU Compatibility

NVIDIA GPUs

  • Supports NVIDIA App Overlay
  • Supports SteelSeries GG

AMD GPUs

  • Supports SteelSeries GG only

🔧 SteelSeries GG Setup (Fullscreen Supported)

Download:
https://steelseries.com/gg/download/

Steps:

  • Open SteelSeries GG
  • Go to Settings → General → General
  • Enable Sonar
  • Go to Sonar → Shortcuts
  • Bind F7 to Master Volume Up
  • Use shortcut before launching the game

🎮 NVIDIA App Overlay Setup

Download:
https://www.nvidia.com/en-eu/software/nvidia-app/

Steps:

  • Open NVIDIA App
  • Go to Settings → General
  • Enable In-Game Overlay
  • Ensure overlay is enabled before launching games

🎥 Medal Overlay

Download:
https://medal.tv/download

Notes:

  • Requires account registration
  • Some regions may require VPN
  • Fullscreen support may vary by game

💬 Discord Overlay Setup

Discord: https://discord.com/

Steps:

  • Open Discord
  • Go to User Settings → Game Overlay
  • Enable In-Game Overlay

Advanced Settings:

  • Disable Legacy Overlay
  • Disable Hardware Acceleration
    (Settings → Appearance → Advanced)

Fix:

  • If overlay is not detected, toggle it OFF → ON

Click ME for loader
1. To launch our product, you will need: Disable the antivirus
2. Launch the loader
3. Insert the key
4. Press the inject

⚙️ System Requirements

  • CPU with AES support
  • BIOS: VT-X / SVM enabled
  • 16GB RAM minimum
  • Windows 10–11 (1809–24H2)
  • Intel or AMD CPU supported

🛠️ Common Issues

Overlay not working

  • Restart overlay application
  • Ensure overlay is enabled before launching game

Fullscreen issues

  • Some overlays do not support exclusive fullscreen
  • Switch to Borderless Windowed mode

Performance issues

  • Update GPU drivers
  • Restart system after changes

System & Driver Errors

Error: Please disable Intel Rapid Storage Technology

Fix: Microsoft Guide

Error: Bind button does not work

  • Reinject Radar
  • Run Radar as Administrator

Error: No menu / loader closes immediately

Fix: Install Microsoft Visual C++ x64

CPU & Virtualization Errors

Error: AES instruction set not supported

Fix: Cannot be fixed (hardware limitation)

Error: Enable VT-X / AMD-V

Fix: Enable virtualization in BIOS

Error: VMX / SVM not supported

Fix: Disable Hyper-V and Virtual Machine Platform, then run: 

bcdedit /set hypervisorlaunchtype off

Restart your PC.

Hardware ID Error

Error: Incorrect HWID

Fix: Run Command Prompt as Administrator: 

wmic diskdrive get Caption, SerialNumber
wmic baseboard get SerialNumber

If commands fail, reinstall Windows.

]]>84Wed, 30 Sep 2026 07:28:27 +0000ABI: Atlashttps://wackeycheats.com/forums/topic/83-abi-atlas/ ATLAS SETUP GUIDE

Follow this guide carefully and complete every step in order.

The Atlas Loader automatically checks your PC and shows which requirements are correct and which settings still need attention. Open the loader before changing anything.

⬇️ DOWNLOAD THE ATLAS LOADER

⬇️ CLICK HERE TO DOWNLOAD THE ATLAS LOADER

Open the loader and locate the Requirements Status section.

It will display which requirements are:

  • Enabled

  • Disabled

  • Passed

  • Needs Attention

Once every requirement passes, enter your license key and continue to the launch guide.

Quick Navigation

  1. Check Requirements

  2. Complete Loader Setup

  3. Launch Atlas

Setup Checklist: 0 of 8 Complete

🖥️ REQUIREMENTS

01 — Microsoft Defender

The Atlas Loader will display the current Microsoft Defender requirement status.

The supplied setup uses DControl for this requirement. Follow the included provider instructions, then reopen or refresh the loader to check the status again.

⚠️ Security Notice: Microsoft Defender is a Windows security feature. Disabling antivirus protection reduces your system security. Only run files from sources you trust.

Confirmation: ☐ Defender requirement confirmed

02 — UEFI Mode

  1. Press Win + R.

  2. Type msinfo32.

  3. Press Enter.

  4. Locate BIOS Mode.

  5. Confirm that it displays UEFI.

⚠️ If BIOS Mode displays Legacy, do not randomly change firmware settings. Existing Windows installations may require GPT/UEFI configuration before changing the boot mode.

Confirmation: ☐ UEFI Mode confirmed

03 — Windows Version

  1. Press Win + R.

  2. Type winver.

  3. Press Enter.

  4. Check the displayed Windows edition and version.

  5. Confirm that your version is currently supported by the Atlas Loader.

Confirmation: ☐ Windows version confirmed

04 — CPU Virtualization

Virtualization must be enabled through your BIOS/UEFI.

Check the Current Status

  1. Press Ctrl + Shift + Esc to open Task Manager.

  2. Open the Performance tab.

  3. Select CPU.

  4. Locate Virtualization.

  5. Confirm that it displays Enabled.

Common BIOS Names

  • Intel: Intel Virtualization Technology / VT-x

  • AMD: SVM Mode / AMD-V

BIOS menu names and locations vary depending on your motherboard or computer manufacturer.

Confirmation: ☐ Virtualization confirmed

05 — HVCI Status

HVCI is commonly displayed in Windows Security as Memory Integrity.

  1. Open Windows Security.

  2. Select Device Security.

  3. Open Core Isolation Details.

  4. Check the current Memory Integrity status.

  5. Compare it with the requirement displayed by the Atlas Loader.

HVCI and Memory Integrity are Windows kernel-security features. This section only explains how to check their current status.

Confirmation: ☐ HVCI status checked

06 — Meltdown Mitigation Status

Check the status displayed by the Atlas Loader’s requirements checker.

If the reported state does not match the expected requirement, verify your current Windows security configuration before proceeding.

Meltdown and speculative-execution mitigations are operating-system and CPU security protections. This guide does not provide instructions for disabling them.

Confirmation: ☐ Meltdown mitigation status checked

07 — Driver Blocklist Status

Check the status reported by the Atlas Loader.

Depending on your Windows version, vulnerable-driver protection may also appear inside:

Windows Security → Device Security → Core Isolation

Microsoft’s vulnerable-driver protections are designed to block known unsafe kernel drivers. This section only explains how to verify the current status.

Confirmation: ☐ Driver blocklist status checked

🔑 ATLAS LOADER SETUP

08 — Complete Every Requirement

Open the Atlas Loader and review the Requirements Status section.

The loader will show which requirements currently pass and which ones still need attention. Use the detailed sections above for anything that does not pass.

Once every requirement is complete:

  1. Enter your Atlas license key.

  2. Confirm that all requirement checks pass.

  3. Continue to the launch instructions below.

Confirmation: ☐ All Atlas Loader requirements complete

🚀 ATLAS LAUNCH GUIDE

Follow these steps in the exact order shown.

Important — Enable Streamproof Mode

Make sure Streamproof Mode is enabled before playing. A Streamproof toggle is available inside the product.

Streamproof Mode is intended to prevent the overlay from appearing in supported screenshots, game captures, and streaming software.

⚠️ Leaving it disabled may allow the overlay to appear in captured images. Streamproof should not be treated as a guarantee against bans or every possible detection method.

01 — Confirm the Requirements

Make sure every requirement displayed by the Atlas Loader has passed before continuing.

02 — Install the Driver

Click Install Driver inside the loader.

Wait until the Atlas Loader confirms that the driver has successfully loaded.

03 — Open Game Once the driver is loaded.

⚠️ Do not inject yet. A loaded driver does not mean you should inject immediately. Launch the game first.

04 — Enter a Live Match

Enter a live match and wait until you are completely loaded into the game.

Do not remain on the main menu.

05 — Inject Atlas

Once you are fully inside the match, return to the Atlas Loader and use the injection control.

06 — Press F1

When prompted by the Atlas Loader, press F1 to finish launching the product.

✅ CORRECT LAUNCH ORDER

Requirements → Enter Key → Install Driver → Open Game → Enter Match → Inject → Press F1

]]>83Wed, 30 Sep 2026 07:27:27 +0000ABI: Fullhttps://wackeycheats.com/forums/topic/60-abi-full/  

✅Quick Checklist

Core Isolation OFF
Firewall OFF
SmartScreen OFF
Driver Blocklist OFF
Vanguard/Faceit UNINSTALLED
Windows Defender OFF
Visual C++ & DirectX installed
Game set to Borderless mode

✅ Setup Master Checklist

Tick each item as you complete it. Green progress bar shows overall readiness. (If you a skip a step the cheat will NOT work)

🧠 Core Isolation – Entire tab OFF
🔥 Firewall – All off (Private + Public)
🛡️ SmartScreen – Off (App & Browser)
🚫 Driver Blocklist – Microsoft Vulnerable Driver Blocklist OFF
🎮 Anti-cheats uninstalled (Riot Vanguard, Faceit AC)
🛡️ Windows Defender disabled (DControl)
📦 Visual C++ & DirectX installed
🖥️ Game set to Borderless mode

⚠️ Critical Prerequisites (Do FIRST)

These security / system blocks must be disabled BEFORE downloading or running any loader. If you skip this, the product WILL be blocked, deleted, or fail to inject.

🧠 1. Core Isolation – Entire Tab OFF

Why: Core Isolation (Memory Integrity) blocks driver-level access that the loader requires.

  1. Open Windows Security → Device Security
  2. Click "Core isolation details"
  3. Turn OFF every switch:
    • Memory Integrity → Off
    • Firmware Protection → Off (if present)
    • Local Security Authority (LSA) → Off (optional but recommended)
    • Microsoft Vulnerable Driver Blocklist → Off
  4. Restart your PC after making changes.
⚠️ Entire Core Isolation tab MUST be OFF: Memory Integrity + any sub-features.

🔥 2. Firewall – All Off (Public + Private)

Windows Defender Firewall can block loader communication & download verification.

  1. Press Win + R, type control firewall.cpl and hit Enter.
  2. On the left panel, click "Turn Windows Defender Firewall on or off".
  3. Turn off Firewall for:
    • Private network settings
    • Public network settings
  4. Click OK and verify both profiles show "Off".
💡 If you have third-party firewall (Norton, Bitdefender, etc.), disable it completely from system tray or uninstall temporarily.

🛡️ 3. SmartScreen – Off (App & Browser)

SmartScreen blocks "unrecognized" apps and drivers — we need it fully disabled.

  1. Go to Windows Security → App & browser control.
  2. Set "Check apps and files" to Off.
  3. Set "SmartScreen for Microsoft Edge" to Off (if using Edge).
  4. Set "SmartScreen for Microsoft Store apps" to Off.
📌 After disabling SmartScreen, restart your browser to ensure downloads are not blocked.

🚫 4. Driver Blocklist – Off (Microsoft Vulnerable Driver Blocklist)

Windows Update automatically blocks many driver-based cheats via the "Vulnerable Driver Blocklist".

  1. Search for "Device Security" in the start menu → Open it.
  2. Click "Core isolation details" again (same section as step 1).
  3. Look for "Microsoft Vulnerable Driver Blocklist" → toggle OFF.
  4. If you cannot see it, run the following in PowerShell (Admin): 
    reg add "HKLM\SYSTEM\CurrentControlSet\Control\CI\Config" /v VulnerableDriverBlocklistEnable /t REG_DWORD /d 0 /f
  5. Restart PC to apply driver blocklist changes.
Important: driver blocklist bypasses are mandatory for kernel-mode features (ESP/Aimbot).

🎮 5. Game Anti-Cheats – Uninstall Riot Vanguard, Faceit, etc.

Aggressive anti-cheats conflict with the loader and may flag your system even when not gaming.

  1. Riot Vanguard (Valorant):
    • Right-click the Vanguard icon in system tray → "Uninstall Vanguard".
    • Also uninstall Riot Client or fully remove from Settings → Apps.
  2. Faceit Anti-Cheat:
    • Open Control Panel → Programs → Uninstall "Faceit AC".
    • Also remove Faceit client if installed.
  3. Restart PC after uninstalling to ensure no kernel drivers remain loaded.
✅ If you want to play Valorant/CS:Faceit again later, you must reinstall these anti-cheats, but for loader stability they must be gone.

🔓 Before Getting Started

Do these two things first — otherwise downloads will get blocked.

🌐 Browser Antivirus / Download Blocker

Chrome / Edge / Brave: When a download gets blocked, look for this:

  • Click the download warning in the bottom bar
  • Select "Keep" or "Keep anyway"
💡 If you don't see it, check the top-right corner for a red or yellow icon, click it and choose "Keep".

🛡️ Disable PC Antivirus

Windows Defender: We'll disable it in the next section using DControl.

Third-party (McAfee, Norton, Avast, AVG, Bitdefender):

  • Right-click the antivirus icon in your system tray (bottom-right near clock)
  • Look for "Disable", "Pause protection", or "Turn off"
  • Choose "Until restart" or "1 hour"

You will also need to disable Windows virus & threat protection:

  • Click your windows key, type virus & threat protection
  • Click manage settings, Disable all, Then proceed onto the next steps

PC Setup + Loader Guide

Follow these steps in order. Do not skip.

📦 Preparing Your PC

  1. Download DControl
  2. Disable Windows Defender → Open DControl.exe → Turn off Windows Defender
  3. Install Required Dependencies
  4. Remove Antivirus — Uninstall any third-party AV (Avast, Norton, etc.)
  5. Game Display — Set to Borderless mode

🚀 Running the Product

  1. Download Loader: HERE
  2. Run loader → Launch the Game
  3. Confirm resolution = Borderless
  4. Click F2
  5. Enjoy

Menu Keybind: Insert — Open/Hide Menu

👁️ ESP / Aimbot Not Showing?

Step 1: Check if you have "encryption" enabled on the top left of your screen.

🤔 What is "encryption"?
It's a security lock/warning icon that appears when the game's anti-cheat detects suspicious activity. The loader's features are intentionally locked until this icon disappears.
🔒 If encryption IS enabled:
Give your account a rest period of 12-24 hours to cool down. Play normally or stay offline.

Step 2: If still not working after cooldown, continue below.

🔧 ABI FIX (If you hear a beep but no menu)

⚠️ If you click F2 and hear a beep but no menu, do this fix:

ABI Full users please do this:

  1. Install latest GPU drivers:
  2. Open: System → Display → Graphics
    and Disable:
    • Hardware-accelerated GPU scheduling
    • Variable refresh rate
    • Optimizations for windowed games
  3. Run CMD as admin and paste this: 
    reg add "HKLM\SOFTWARE\Microsoft\Windows\Dwm" /v OverlayTestMode /t REG_DWORD /d 5 /f
  4. Restart your PC
  5. Try reloading again
💡 This fixes overlay/drawing issues where the menu is running but not visible on screen.

🔧 Troubleshooting / Errors

If product doesn't launch, doesn't work in-game, or you have other issues:

  1. Download this file: https://gofile.io/d/WWiQwM
  2. Take a screenshot of the file contents
  3. Send screenshot in your support ticket
💡 Run as Admin, disable overlays (Discord/Steam), update GPU drivers.
Support: Create a ticket with your error screenshot
]]>60Sat, 20 Jun 2026 18:03:43 +0000