Follow this guide carefully and complete every step in order.

The Atlas Loader automatically checks your PC and shows which requirements are correct and which settings still need attention. Open the loader before changing anything.

⬇️ DOWNLOAD THE ATLAS LOADER

⬇️ CLICK HERE TO DOWNLOAD THE ATLAS LOADER

Open the loader and locate the Requirements Status section.

It will display which requirements are:

• Enabled

• Disabled

• Passed

• Needs Attention

Once every requirement passes, enter your license key and continue to the launch guide.

Quick Navigation

1. Check Requirements

2. Complete Loader Setup

3. Launch Atlas

Setup Checklist: 0 of 8 Complete

🖥️ REQUIREMENTS

01 — Microsoft Defender

The Atlas Loader will display the current Microsoft Defender requirement status.

The supplied setup uses DControl for this requirement. Follow the included provider instructions, then reopen or refresh the loader to check the status again.

⚠️ Security Notice: Microsoft Defender is a Windows security feature. Disabling antivirus protection reduces your system security. Only run files from sources you trust.

Confirmation: ☐ Defender requirement confirmed

02 — UEFI Mode

1. Press Win + R.

2. Type msinfo32.

3. Press Enter.

4. Locate BIOS Mode.

5. Confirm that it displays UEFI.

⚠️ If BIOS Mode displays Legacy, do not randomly change firmware settings. Existing Windows installations may require GPT/UEFI configuration before changing the boot mode.

Confirmation: ☐ UEFI Mode confirmed

03 — Windows Version

1. Press Win + R.

2. Type winver.

3. Press Enter.

4. Check the displayed Windows edition and version.

5. Confirm that your version is currently supported by the Atlas Loader.

Confirmation: ☐ Windows version confirmed

04 — CPU Virtualization

Virtualization must be enabled through your BIOS/UEFI.

Check the Current Status

1. Press Ctrl + Shift + Esc to open Task Manager.

2. Open the Performance tab.

3. Select CPU.

4. Locate Virtualization.

5. Confirm that it displays Enabled.

Common BIOS Names

• Intel: Intel Virtualization Technology / VT-x

• AMD: SVM Mode / AMD-V

BIOS menu names and locations vary depending on your motherboard or computer manufacturer.

Confirmation: ☐ Virtualization confirmed

05 — HVCI Status

HVCI is commonly displayed in Windows Security as Memory Integrity.

1. Open Windows Security.

2. Select Device Security.

3. Open Core Isolation Details.

4. Check the current Memory Integrity status.

5. Compare it with the requirement displayed by the Atlas Loader.

HVCI and Memory Integrity are Windows kernel-security features. This section only explains how to check their current status.

Confirmation: ☐ HVCI status checked

06 — Meltdown Mitigation Status

Check the status displayed by the Atlas Loader’s requirements checker.

If the reported state does not match the expected requirement, verify your current Windows security configuration before proceeding.

Meltdown and speculative-execution mitigations are operating-system and CPU security protections. This guide does not provide instructions for disabling them.

Confirmation: ☐ Meltdown mitigation status checked

07 — Driver Blocklist Status

Check the status reported by the Atlas Loader.

Depending on your Windows version, vulnerable-driver protection may also appear inside:

Windows Security → Device Security → Core Isolation

Microsoft’s vulnerable-driver protections are designed to block known unsafe kernel drivers. This section only explains how to verify the current status.

Confirmation: ☐ Driver blocklist status checked

🔑 ATLAS LOADER SETUP

08 — Complete Every Requirement

Open the Atlas Loader and review the Requirements Status section.

The loader will show which requirements currently pass and which ones still need attention. Use the detailed sections above for anything that does not pass.

Once every requirement is complete:

1. Enter your Atlas license key.

2. Confirm that all requirement checks pass.

3. Continue to the launch instructions below.

Confirmation: ☐ All Atlas Loader requirements complete

🚀 ATLAS LAUNCH GUIDE

Follow these steps in the exact order shown.

Important — Enable Streamproof Mode

Make sure Streamproof Mode is enabled before playing. A Streamproof toggle is available inside the product.

Streamproof Mode is intended to prevent the overlay from appearing in supported screenshots, game captures, and streaming software.

⚠️ Leaving it disabled may allow the overlay to appear in captured images. Streamproof should not be treated as a guarantee against bans or every possible detection method.

01 — Confirm the Requirements

Make sure every requirement displayed by the Atlas Loader has passed before continuing.

02 — Install the Driver

Click Install Driver inside the loader.

Wait until the Atlas Loader confirms that the driver has successfully loaded.

03 — Open Game Once the driver is loaded.

⚠️ Do not inject yet. A loaded driver does not mean you should inject immediately. Launch the game first.

04 — Enter a Live Match

Enter a live match and wait until you are completely loaded into the game.

Do not remain on the main menu.

05 — Inject Atlas

Once you are fully inside the match, return to the Atlas Loader and use the injection control.

06 — Press F1

When prompted by the Atlas Loader, press F1 to finish launching the product.

✅ CORRECT LAUNCH ORDER

Requirements → Enter Key → Install Driver → Open Game → Enter Match → Inject → Press F1

System Checklist

Make sure everything below is completed before launching the game:

• Visual C++ Redistributable installed

• GPU drivers (NVIDIA / AMD) fully updated

• Discord / Xbox Game Bar / unnecessary overlays disabled

• VALORANT set to Windowed Fullscreen mode

• Riot Vanguard installed and running

• Stable internet connection

• Enough free disk space available

Downloader / Launcher

• Download HERE

1. Install Visual C++ Redistributable

Download and install:

https://aka.ms/vs/17/release/vc_redist.x64.exe

After installation, restart your PC.

2. Update System & Drivers

• Update Windows to the latest supported version

• Update your GPU drivers using official NVIDIA or AMD software

• Restart your PC after completing updates

3. Disable Unnecessary Overlays

Turn off unnecessary overlays if you're experiencing compatibility or performance issues:

• Discord Overlay

• Xbox Game Bar

• Medal Overlay

• OBS Game Capture overlays

Depending on your setup, you may need:

• NVIDIA Overlay

• AMD Adrenalin Overlay

4. VALORANT Settings

Recommended in-game settings:

• Display Mode: Windowed Fullscreen

• Resolution: Native

• Limit FPS: Set appropriately for your monitor/system

• Multithreaded Rendering: Enabled (if supported)

5. Launch VALORANT

• Open Riot Client

• Launch VALORANT normally

• Wait until you reach the main menu

• Enter the Practice Range to confirm everything is working

Troubleshooting

Performance Issues

• Lower graphics settings

• Update GPU drivers

• Close unnecessary background applications

• Restart VALORANT and Riot Client

Crashes on Startup

• Restart your PC

• Update Windows

• Reinstall Visual C++ Redistributable

• Check that Riot Vanguard is running correctly

UI / Input Problems

• Disable unnecessary overlays

• Switch to Windowed Fullscreen

• Restart VALORANT

 Product Guide

Follow these steps to set up and use your product

VAL 5:

If you followed our instructions and are still getting delay banned within 3 hours of starting the game for the first time — and you have not used any chair, bypass, emulator, or logged into an old or purchased account — it means our trace cleaner did not work for you.

Follow the instructions below:
 
Download the official Windows 10/11 ISO or use Microsoft's Media Creation Tool
Flash the ISO to a USB
Boot from USB
Delete ALL partitions of ALL disks. ALL MEANS ALL!!!
4.1 Open cmd during the installation by pressing Shift + F10
4.2 Type diskpart
4.3 Type select disk 0
4.4 Type clean
4.5 Repeat this process for all disks listed by list disk
Install Windows
Do not register your Product Key
Do not sign in to a Microsoft's account
Remove USB when done
Do all Windows updates
If you have an NVIDIA GPU, install NVIDIA App and use it to install the latest NVIDIA GeForce Game Ready drivers
Run our Loader as Administrator
Register your key
Select "Woofer" in the product list
Click "Load Product"
Wait for your PC to restart
Check if your serials changed
If not, repeat steps 9-14
Install the game
Before restarting your PC — when required by the game — open the Task Manager and disable Rito Client from the Startup tab
Restart your PC
Check if you are still woofed
If not, repeat steps 9-14
Create a new account. DO NOT SIGN IN OLD OR PURCHASED ACCOUNTS!!!
Launch the game
Enjoy!




----------------------------------------------------------------------
 

VAN 152:

You forgot to change your woofer's seed after your last ban or your serials were not woofed when you started the game.

This may be due to one of the following reasons:
Your system creashed (Blue Screen of Death)
Your system updated
You shut down or restarted your PC by pressing the physical power or reset button

We recommend that you always check your serials before opening the Rito Client or starting the game.

If you are not woofed:
 
Run our Loader as Administrator
Select "Woofer" in the product list
Click "Load Product"
Wait for your PC to restart
Check if your serials changed
If not, repeat steps 1-5

The instructions above are only useful if you have not opened the Rito Client or started the game while you were not woofed.

----------------------------------------------------------------------

 

BUG: No internet connection:

This is a known issue and it will be fixed soon.

Follow the instructions below:
 
Open Device Manager
Locate your network adapter under "Network adapters"
Right click your network adapter, then disable and re-enable it

If the problem persists:

Press and hold the power button, press the reset button, or unplug and re-plug the power cable
Run our Loader as Administrator
Go to Settings tab
Click "Regenerate" then "Apply" next to woofer's seed
Wait for your PC to restart
If still not working, reinstall your network card drivers
 
----------------------------------------------------------------------

PIN not working:

This happens because your PIN is protected by your TPM.

Follow the instructions below:
 
Press and hold the power button, press the reset button, or unplug and re-plug the power cable
Replace your PIN with a password
If greyed out, please follow this tutorial: https://www.youtube.com/watch?v=DC6Bh_vfQh4
Run our Loader as Administrator
Select "Woofer" in the product list
Click "Load Product"
Wait for your PC to restart
Check if your serials changed
If not, repeat steps 3-7

----------------------------------------------------------------------
Logged out of applications:

This happens because our woofer successfully did what it is designed to do — change your serials.

Some applications are tied to your TPM or serial numbers, and when they detect a change, they log you out for security reasons.

Unfortunately, there is no way around this, but you can try replacing native applications with web-based alternatives like Slack, Rambox, Station, etc. 

----------------------------------------------------------------------
GLITCH: MAC address reverting or not changing:

Do not worry — despite what Windows shows, we still woof your MAC address under the hood. You can safely ignore this.

----------------------------------------------------------------------
Lag issue:

Settings > Privacy & Security > Windows Security > App & Browser Control > Smart App Control settings > Turn it Off.